Knots damaging guides?

General Kayak Fishing Discussions
Post Reply
Beanpole
Posts: 15
Joined: Thu Apr 02, 2020 11:14 am

Sun Jun 14, 2020 10:04 am

Hey team, back with yet another question. I have been getting into my soft baiting over the past few weeks (bit more successful than my spearfishing of late...). Yesterday I noticed that the last guide on my rod was damaged which ended up cutting the braid which was a pain in the backside...

Anyway, my question is, would you expect reeling the braid to leader knot into the guides to damage them? I understand this is the case with clips and swivels but I wouldn't have thought a knot would. I'm currently just using a double uni knot as I know I can tie it well, but possibly it's not low profile enough? Or is my cheapo shimano softbaiting rod (couple of years old found in my old man's garage) just not up to task? Hope that makes sense, and would appreciate any input!

User avatar
AndrewRawlingson
Posts: 2609
Joined: Thu Apr 05, 2012 10:03 pm
Location: Northland

Sun Jun 14, 2020 10:33 am

Never seen it happen, but it is possible I suppose. Cheap rod/rings won't help. Have a look at the crazy Alberto knot. It is easy to tie and slim. Not as strong as the FG knot, but strong enough!

Beanpole
Posts: 15
Joined: Thu Apr 02, 2020 11:14 am

Sun Jun 14, 2020 3:41 pm

Sweet, I will have a look at that thanks!

Casualtyward
Posts: 425
Joined: Wed Nov 06, 2013 10:05 pm
Kayak Make: Ocean
Kayak Model: Prowler 4.3 Ultra
VHF Call Sign: ZMU7778
Location: Auckland

Mon Jun 15, 2020 12:04 pm

I changed to the FG knot because I was sick of my back to back uni knots catching on the guides. Some guides are easily damaged by getting knocked around, I think that's more likely than the knot damaging them.
Kotare II
Ocean Prowler 4.3 Ultra

Callsign: ZMU7778

User avatar
Al
Posts: 16
Joined: Tue Dec 29, 2015 2:34 pm
Kayak Make: Viking
Kayak Model: Profish GT
VHF Call Sign: ZMX8443
Location: Beachlands
Contact:

Tue Jun 16, 2020 7:17 am

I try and set up FG knots on all my rods before I go... A nice luxury of time and space... Quite hard to tie on the yak, so use modified Albright which is pretty fast and lower profile than double uni. To be honest, the only knots that have damaged guides for me is the double uni.
Don't let the best you have done so far, be the standard for the rest of your life.
https://www.youtube.com/channel/UCJM0wT ... ZyON0RhYkg
Callsign: ZMX8443
Current Rig: Reload all the way.
Past Rig: Profish GT and Cheap Chinese Kayak.

Beanpole
Posts: 15
Joined: Thu Apr 02, 2020 11:14 am

Tue Jun 16, 2020 2:45 pm

Interesting, I think I will be moving away from the double uni then! Might have a crack at tying the FG and then if I do something silly out there can always retie with the albright. Cheers for the advice, always appreciated.

User avatar
Fishfood
Posts: 54
Joined: Sun Jun 17, 2018 11:08 am
Kayak Make: Stealth
Kayak Model: Profisha 525
VHF Call Sign: ZMX9388
Location: Waipu

Wed Jun 17, 2020 10:42 am

I use a Yucatan knot. I usually get set up at home but have tied it a few times on the boat with no problems. I have 2 cheapo soft bait rods and no signs of wear after several years use.

Beanpole
Posts: 15
Joined: Thu Apr 02, 2020 11:14 am

Wed Jun 17, 2020 10:59 am

Do you do a bimini twist to create the loop in the braid before the yucatan knot?

User avatar
sk8e8
Posts: 5263
Joined: Thu Jun 03, 2010 8:13 am
Kayak Make: Extreme
Kayak Model: Game King
Location: South Auckland

Thu Jun 18, 2020 10:38 am

I use an FG on all my sets (other than deep water electric where I have no leader).
IMO, the B2B Uni is one of the easier knots, but also the worst. There are plenty of knots I would use instead.
Jigheads Paddling and Fishing Team Member
http://www.facebook.com/Jigheadspaddlingandfishing

Yak PBs. Snapper: 18lb 12oz @ Cuvier * John Dory: 4lb 6oz @ Cuvier * Kingfish: 10kg @ Mayor Island * Blue Nose: 22.7kg @ White Island * Hapuka: 8kg @ White Island * Skipjack Tuna: 5lb @ Auckland

Extreme 605
Yamaha FXHO * Viking Profish 400 * Pinnacle Elite * Viking Profish 440 * Mission Catch 420

Rabbit
Posts: 46
Joined: Tue Apr 22, 2014 10:41 pm
Kayak Make: Stealth
Kayak Model: Fisha 555
Location: Auckland

Thu Jun 18, 2020 11:05 am

I've never had my rod eyes damaged by the braid to leader knot.

I use the 5 turn surgeons knot which is ;
- Slim and doesn't affect casting distance
- Super strong rating and the knot itself has never ever failed me over the 8 years or so i've used it
- Can be quickly and easily retied on the yak after a bust off/getting snagged - This is really important for me as I do the majority of my fishing in skinny water (<10m) and over foul, especially in winter, so I could be retying the leader a number of times on a mission (when casting 20m+ in front of you in skinny water, unless you know the terrain really well you don't really know how deep the water is so an element of getting snagged is almost impossible to avoid)

HookiT
Posts: 572
Joined: Tue Jan 31, 2012 3:13 pm
Kayak Make: Viking
Kayak Model: PRO 400 LITE
VHF Call Sign: ZMQ4712

Thu Jun 18, 2020 12:23 pm

FG tied at home , 5 turn surgeons on yak , like Rabbit said super strong and a no damage to guide knot.

Beanpole
Posts: 15
Joined: Thu Apr 02, 2020 11:14 am

Thu Jun 18, 2020 8:29 pm

Thanks, I really appreciate the input. This is an awesome resource and it's super helpful to learn from each of your experiences. Hang tight for further questions in future!

PJay
Posts: 1312
Joined: Wed Dec 22, 2010 9:56 am
Kayak Make: Ocean
Kayak Model: Prowler 4.5 x 2
Location: Russell, Bay of Islands

Sun Jun 21, 2020 6:32 pm

Many years ago, I found back to back uni knots too bulky for my softbait rods. Improved Allbright is fine, quick to tie on the kayak as noted above.

BTW old Shimano softbaiting rods work well still - one of the rods I used in the 3-species kayak SB comp yesterday is a purple Catana 732 that i bought some 13 years ago, and it has been hammered in kayak fishing all its life.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest