Cheap Knife Sharpening Guide

For the discussion of how you cook your catch, post your favorite recipes in here for all to try
Post Reply
User avatar
MikeAqua
Posts: 3370
Joined: Mon Aug 17, 2009 4:23 pm
Kayak Make: Viking
Kayak Model: Profish 400
VHF Call Sign: ZMT-7387
Location: Nelson

Mon Jan 30, 2017 9:57 am

For as long as I can remember I have been terrible at sharpening knives. I know the theory but I just can't hold the knife at a consistent/accurate angle. I've previously used one of those pull through sharpeners, which aren't that effective.

Then, I spotted one of these at Mitre 10 on Saturday.

https://www.thescullery.co.nz/shop/prod ... ning-guide

It's a little wedge that slides onto the back edge of the blade and maintains a much more constant angle to the whetstone than I can achieve by myself.

Now all my knives and cleavers are sharp.
"No good story begins with a salad"
ZMT-7387
Viking Profish 400Stolen!! Yellow/Black
'Zespri' Viking Espri
Viking 2+1 Stolen!! Orange/yellow with scratch along one side

rusty12
Posts: 25
Joined: Fri Dec 03, 2010 10:07 am
Kayak Make: Barracuda
Kayak Model: Fish Pro
Location: Auckland

Mon Jan 30, 2017 11:47 am

Thanks, I have been looking for something like this. Very useful!
Ocean Kayak Ultra 4.7
Barracuda Fish Pro

User avatar
FatherOfMany
Posts: 1759
Joined: Mon Apr 30, 2012 8:34 am
Kayak Make: Old Town
Kayak Model: Predator XL Petrol
VHF Call Sign: ZMW9858
Location: Papakura, Auckland
Contact:

Mon Jan 30, 2017 11:59 am

Me too, thanks MikeAqua

Sent from my SM-G900F using Tapatalk
----------------------------------------------------
Old Town Predator XL
OK Tetra 12
Old Town Predator 13
OK Prowler Elite 4.5 #1, OK Prowler Elite 4.5 #2

PB: Snapper=66cm, J.D.=39cm, Gurnard=38cm

VHF Callsign: ZMW 9858

Kayak Fishing Auckland

User avatar
awondering
Posts: 6596
Joined: Sat Apr 25, 2009 8:47 am
Kayak Make: Viking
Kayak Model: Viking PF400 Custom Black
VHF Call Sign: ZMT8884
Location: Auckland
Contact:

Mon Jan 30, 2017 12:08 pm

I could shave with my knives, its worth sticking at it to be able to get an edge from a steel... once mastered just dont let anyone else touch them, or the wife and daughter cutting stuff on a plates :|

User avatar
Hainesy
Moderator
Posts: 8258
Joined: Wed Sep 22, 2010 3:20 pm
Kayak Make: Viking
Kayak Model: Reload
VHF Call Sign: ZMW 2196
Location: West Harbour

Mon Jan 30, 2017 12:17 pm

awondering wrote:I could shave with my knives, its worth sticking at it to be able to get an edge from a steel... once mastered just dont let anyone else touch them, or the wife and daughter cutting stuff on a plates :|
..or let KLB borrow them to hack at a fish attempting to try and take the fillets off


Sent from my iPad using Tapatalk
"The trouble with common sense is that it's not too common !"

Viking ReLoad
Ocean Kayak Trident 4.3
Phoenix Hornet - "Retired"
Ocean Kayak Ultra 4.3 - "Retired"
Viking Profish 440 - "Retired"
Scrambler XT - "Retired"

ZMW 2196

Image
Image

User avatar
Hainesy
Moderator
Posts: 8258
Joined: Wed Sep 22, 2010 3:20 pm
Kayak Make: Viking
Kayak Model: Reload
VHF Call Sign: ZMW 2196
Location: West Harbour

Mon Jan 30, 2017 12:19 pm

I'm not flash at sharpening knives so have a Smiths sharpening stone system, and an Edgemaster Pro which is what I use the majority of the time


Sent from my iPad using Tapatalk
"The trouble with common sense is that it's not too common !"

Viking ReLoad
Ocean Kayak Trident 4.3
Phoenix Hornet - "Retired"
Ocean Kayak Ultra 4.3 - "Retired"
Viking Profish 440 - "Retired"
Scrambler XT - "Retired"

ZMW 2196

Image
Image

User avatar
MikeAqua
Posts: 3370
Joined: Mon Aug 17, 2009 4:23 pm
Kayak Make: Viking
Kayak Model: Profish 400
VHF Call Sign: ZMT-7387
Location: Nelson

Mon Jan 30, 2017 12:42 pm

awondering wrote:I could shave with my knives, its worth sticking at it to be able to get an edge from a steel... once mastered just dont let anyone else touch them, or the wife and daughter cutting stuff on a plates :|
I can shave with mine now too!
"No good story begins with a salad"
ZMT-7387
Viking Profish 400Stolen!! Yellow/Black
'Zespri' Viking Espri
Viking 2+1 Stolen!! Orange/yellow with scratch along one side

User avatar
AndrewRawlingson
Posts: 2448
Joined: Thu Apr 05, 2012 10:03 pm
Location: Northland

Mon Jan 30, 2017 2:21 pm

That looks pretty good. Nice and simple. I have a Lansky which gives good results, but find it a bit frustrating to use.
Image

User avatar
MikeAqua
Posts: 3370
Joined: Mon Aug 17, 2009 4:23 pm
Kayak Make: Viking
Kayak Model: Profish 400
VHF Call Sign: ZMT-7387
Location: Nelson

Mon Jan 30, 2017 2:28 pm

AndrewRawlingson wrote:That looks pretty good. Nice and simple. I have a Lansky which gives good results, but find it a bit frustrating to use.
Yeah I had a Lansky for a while. I found it OK some days, but other days I just didn't have the knack. Eventually got rid of it to a mate.
"No good story begins with a salad"
ZMT-7387
Viking Profish 400Stolen!! Yellow/Black
'Zespri' Viking Espri
Viking 2+1 Stolen!! Orange/yellow with scratch along one side

Casualtyward
Posts: 369
Joined: Wed Nov 06, 2013 10:05 pm
Kayak Make: Ocean
Kayak Model: Prowler 4.3 Ultra
VHF Call Sign: ZMU7778
Location: Auckland

Tue Jan 31, 2017 10:28 am

I have got some sort of fancy knife sharpening tool that's supposed to hold the blade just right, but I've never used it. I take my knives to the Mad Butcher where they do free knife sharpening. Just drop them off and pick them up a few days later.
Kotare II
Ocean Prowler 4.3 Ultra

Callsign: ZMU7778

hermodo
Posts: 320
Joined: Wed Nov 27, 2013 9:19 am
Kayak Make: ocean kayak
Kayak Model: 4.1 ultra
VHF Call Sign: -
Location: napier

Wed Jan 24, 2018 6:27 pm

I use a Lansky set up with the stones & the little jig . I ran out of the oil , and used some 3: 1 oil but that wasn't so good . I now use rice bran oil with a couple of drops of diesel in it . Theres reason for this mad scientist approach. You sharpen the knives, and I use a 20 degree angle on my utility knives, & 17 degrees on my fillet knives, and after a while the fine metal choggs up the grain on the stones. using the lighter oil and the fuel mix , if you lie the stones cutting face up and soak the face of the stone in the oil mix , the metal particles will lift out of the stone to some extent. with a paper towel you can then lightly brush it away , leaving the stone fresh .
I've got a bit of work ahead of me tho, I fillet & butcher almost every day, & guard my knives carefully . Today , leant my butcher knife to a volunteer at work , stressing that they wear a stainless cut glove ,after seeing them struggle with blunt company knife . Result ? Good safe fingers but destroyed the blade !!!! Won't do that again,eh!

snap fisha
Posts: 416
Joined: Fri Nov 14, 2008 8:51 pm
Kayak Make: viking
Kayak Model: profish 400
Location: Invercargill

Sat Feb 24, 2018 1:23 pm

Just home from hunting and fishing invercargill where a local person comes in for 3 hours on the last Saturday I'd every month and sharpens one knife per customer awesome guy and he does it with a oil stone amazing to watch now off out to buy a new oil stone and practise on my other knifes. A huge thanks to hunting and fishing invercargill for putting this on every month.
snap fish 101 paddles a viking 400

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest