Non return scupper plugs

Adverts for new and used kayaks and equipment.
Post Reply
User avatar
Marc N
Posts: 271
Joined: Sun Oct 29, 2017 9:06 am
Kayak Make: FishMaster
Kayak Model: Elite4
VHF Call Sign: none
Location: Birkenhead Auckland NZ

Tue Dec 18, 2018 9:12 am

I've seen on the youtubery, that the Old Town Predator PDL comes with scupper plugs that have a non return valve in them, allowing water to go out, but not in.

Does any one have any idea where I could get 3 of these? And if any one has these, what's the diameter of them?

oops, here they are - https://www.austinkayak.com/products/66 ... -Each.html I wonder what shipping to NZ will be....
Last edited by Marc N on Tue Dec 18, 2018 9:41 am, edited 1 time in total.
VALKOHAI
Fishmaster Elite4 'yak
Fishing for every thing from Trout to Kingfish
Image

Casualtyward
Posts: 402
Joined: Wed Nov 06, 2013 10:05 pm
Kayak Make: Ocean
Kayak Model: Prowler 4.3 Ultra
VHF Call Sign: ZMU7778
Location: Auckland

Tue Dec 18, 2018 9:32 am

Or you could go for the more local option...

https://www.kayakadventures.co.nz/24/7- ... p/49885137
Kotare II
Ocean Prowler 4.3 Ultra

Callsign: ZMU7778

User avatar
Marc N
Posts: 271
Joined: Sun Oct 29, 2017 9:06 am
Kayak Make: FishMaster
Kayak Model: Elite4
VHF Call Sign: none
Location: Birkenhead Auckland NZ

Tue Dec 18, 2018 9:43 am

Casualtyward wrote:
Tue Dec 18, 2018 9:32 am
Or you could go for the more local option...

https://www.kayakadventures.co.nz/24/7- ... p/49885137
Ah hah perfect! I'll have to enquire after the diameter, bloody great! thanks for that.
VALKOHAI
Fishmaster Elite4 'yak
Fishing for every thing from Trout to Kingfish
Image

TwoSpoons
Posts: 889
Joined: Mon Dec 01, 2008 3:35 pm
Kayak Make: CLC boats
Kayak Model: Sea Island Sport
VHF Call Sign: ZMW5652
Location: Pukekohe

Thu Dec 20, 2018 12:20 pm

I put a non-return valve in my scupper, but it rapidly starts leaking as bits of sand or seaweed get in it, and stop the valve flap from sealing.
Electronics : its still magic, even when you know how its done.
ZMW5652

User avatar
Marc N
Posts: 271
Joined: Sun Oct 29, 2017 9:06 am
Kayak Make: FishMaster
Kayak Model: Elite4
VHF Call Sign: none
Location: Birkenhead Auckland NZ

Thu Dec 20, 2018 9:18 pm

ahhh, good to know, I ordered a couple from Coro Kayaks, they're 34 mm in diameter which is less than my scuppers, but I'm going to glue them into my existing 'cup' scupper plugs and see how they go.

I don't much launch from sand but I will take care to keep em clean

thanks for that observation.
VALKOHAI
Fishmaster Elite4 'yak
Fishing for every thing from Trout to Kingfish
Image

User avatar
Hainesy
Moderator
Posts: 8296
Joined: Wed Sep 22, 2010 3:20 pm
Kayak Make: Viking
Kayak Model: Reload
VHF Call Sign: ZMW 2196
Location: West Harbour

Mon Dec 24, 2018 9:01 pm

Having used these myself, I’d recommend that if you’re surf launching, don’t put the non return scupper valves in until after you’ve cleared the surf...

Reason being that if you take water over the front and the cockpit get water in it, the water can’t escape fast enough if The valves are fitted and you loose the ability to paddle and manuouver quickly with the additional weight
"The trouble with common sense is that it's not too common !"

Viking ReLoad
Ocean Kayak Trident 4.3
Phoenix Hornet - "Retired"
Ocean Kayak Ultra 4.3 - "Retired"
Viking Profish 440 - "Retired"
Scrambler XT - "Retired"

ZMW 2196

Image
Image

User avatar
Marc N
Posts: 271
Joined: Sun Oct 29, 2017 9:06 am
Kayak Make: FishMaster
Kayak Model: Elite4
VHF Call Sign: none
Location: Birkenhead Auckland NZ

Fri Jan 04, 2019 10:29 am

Casualtyward wrote:
Tue Dec 18, 2018 9:32 am
Or you could go for the more local option... https://www.kayakadventures.co.nz/24/7- ... p/49885137
I emailed them first, as my yak had bigger scuppers, than the plugs looked to be and they sent me the measurements pronto, delightful!

And I ordered online, fast service and a lovely note from Janet, cheers Janet.

Now, you might ask, why buy scupper plugs that are too thin for the holes?

Herein a pictorial explanation ::

1. this is the plug the 'yak came with
Scupper1.jpg
Scupper1.jpg (87.23 KiB) Viewed 1090 times
2. this is the new plug
Scupper2.jpg
Scupper2.jpg (104.29 KiB) Viewed 1090 times
3. ahaa one fits in the other, I was thinking of wrapping tape around the thin one for a snug fit, but it fits in the original one perfectly
Scupper3.jpg
Scupper3.jpg (90.65 KiB) Viewed 1090 times
4. need to cut a wee hole in the fat one, though
Scupper4.jpg
Scupper4.jpg (90.4 KiB) Viewed 1090 times
5 and if I change my mind, bicycle repair kit...
Scupper5.jpg
Scupper5.jpg (67.76 KiB) Viewed 1090 times
The old grey floppy rubber things that came with the Kayak are a #@$%& to use, they fit well enough, but you have to use two fingers to push them down far enough to seat them and that's difficult at the best of times let alone on the water and they can rupture if a rod butt is used...

The new ones sitting inside the old, provide a good 'handle' to push on, making the process simple and easy. And again I can always get out my trusty bicycle repair kit, if I change my mind.

Hands up anyone, who has still got, a bicycle repair kit.

Note, that I didn't post this in "Tips and ideas to Keep It Simple "
VALKOHAI
Fishmaster Elite4 'yak
Fishing for every thing from Trout to Kingfish
Image

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 10 guests