wanted: m5 stainless steel screw

Adverts for new and used kayaks and equipment.
Post Reply
User avatar
WaterHornet
Posts: 272
Joined: Fri Nov 15, 2013 8:31 pm
Kayak Make: OK
Kayak Model: Trident 4.3
Location: North Shore

Fri Aug 29, 2014 5:57 pm

Hey guys,
Any of you have 4X m5 stainless steel 12mm screw spares?? I've been looking all over the net and hardware stores (even burnsco) for them but no luck :(
Need it for the Starport HD for my O.K. then i can start taking vids with my New GOPRO! :rofl:

Thanks in advance :)
Last edited by WaterHornet on Fri Aug 29, 2014 9:09 pm, edited 1 time in total.
Image

User avatar
Jazza
Posts: 35
Joined: Thu Oct 03, 2013 4:46 pm
Kayak Make: Viking
Kayak Model: Profish 400
Location: Tauranga

Fri Aug 29, 2014 6:11 pm

Have u tried Burnsco? Usually have a large selection, marine grade too.

User avatar
Hairy Little Dwarf
Moderator
Posts: 7110
Joined: Thu Oct 16, 2008 9:39 am
Kayak Make: Phoenix
Kayak Model: Hornet
VHF Call Sign: Red Dwarf

Fri Aug 29, 2014 6:12 pm

I'm sure you could find some purveyor of threaded chandlery while walking around Westhaven ;)

Gurgle Search
Phoenix Hornet - Specialty Assault Craft

Dad! Dad! Look at his fish! It's way bigger than anything you've EVER caught! - Nosey 7-8yo boy on opening my icebox to father strapping down his $XXX Stabicraft 759(?) - Gold. Pure Gold.

User avatar
glint
Posts: 1303
Joined: Thu Nov 20, 2008 5:40 pm
Kayak Model: 6m ?
VHF Call Sign: zmz6495
Location: northshore

Fri Aug 29, 2014 6:49 pm

You are asking for trouble putting stainless screws into brass inserts,they are two far apart on the ECS and will cause problems. if you do you must use a barrier cream and withdraw them often to stop corrosion.
SOF 6mt kayak
Image

User avatar
Snap 4T
Posts: 763
Joined: Tue Mar 12, 2013 11:07 pm
Kayak Make: Viking
Kayak Model: Reload
Location: North Shore

Fri Aug 29, 2014 7:34 pm

Try http://www.edlfast.co.nz/" onclick="window.open(this.href);return false; or http://www.anzor.co.nz/" onclick="window.open(this.href);return false;
Both highly likely have them.
for unusual or odd sizes try handy hw (sunnybrae road)

User avatar
Mental
Site Admin
Posts: 10239
Joined: Mon Sep 29, 2008 2:31 pm
Kayak Make: Stealth
Kayak Model: Evolution 465
VHF Call Sign: ZMS4156
Location: Wellsford, Auckland, NZ
Contact:

Fri Aug 29, 2014 7:36 pm

Yea might a have a few in the garage :?:
Phoenix Kayaks - Hornet
Stealth - Evolution 465
Ramco - Fishmaster 580 My BIG kayak!
...and the countless other kayaks I've owned

Winch
Posts: 2081
Joined: Tue May 12, 2009 8:10 pm
Kayak Make: Kaskazi
Kayak Model: Dorado 2
VHF Call Sign: help
Location: Earth

Fri Aug 29, 2014 8:21 pm

Mental wrote:Yea might a have a few in the garage :?:
I think they are in that box of stuff you borrowed on your last day at your last job :lol:

RJ
Posts: 789
Joined: Fri Nov 01, 2013 6:11 am
Kayak Make: ocean kayak
Kayak Model: ultra 4.7
Location: Napier

Fri Aug 29, 2014 9:03 pm

WaterHornet wrote:Hey guys,
Any of you have 4X m5 stainless steel 12mm screw spares?? I've been looking all over the net for them but no luck :(
Need it for the Starport HD for my O.K. then i can start taking vids with my New GOPRO! :rofl:

Thanks in advance :)
why don't you just go to your local hard ware store or kayak shop instead of wasting your time looking on the net for them

User avatar
Hawk
Posts: 983
Joined: Fri Dec 28, 2012 11:09 pm
Kayak Make: Pinnacle
Kayak Model: Elite
VHF Call Sign: Hawk ZMU3995
Location: Napier

Fri Aug 29, 2014 11:58 pm

WaterHornet wrote:Any of you have 4X m5 stainless steel 12mm screw spares?? I've been looking all over the net and hardware stores (even burnsco) for them but no luck :(
Fortress Fasteners will have what you need.

http://www.fortressfasteners.co.nz/" onclick="window.open(this.href);return false;

Albany Branch
Unit 4, 4 William Pickering Drive, Albany
PO Box 15445, New Lynn
Phone 09 414 7620
Fax 09 414 7410
Email sales.albany@fortressfasteners.co.nz

User avatar
Kayak Adventures
Posts: 188
Joined: Thu Aug 04, 2011 4:18 pm
Kayak Make: Ocean Kayak
Kayak Model: To many models to name
VHF Call Sign: ZMS6165
Location: Coromandel, New Zealand
Contact:

Sat Aug 30, 2014 7:15 am

We also have them.
http://kayakadventures.co.nz/shopping/p ... id=32&=SID" onclick="window.open(this.href);return false;
All the best from the team

Website: http://www.kayakadventures.co.nz
Find us on Facebook: http://www.facebook.com/pages/Coromande ... 33?sk=wall

Stockists of the worlds best brands! Fishing Kayaks, Accessories, Watersport Clothing, Spearfishing Gear and Fishing Tackle

User avatar
SnapperStalker
Posts: 253
Joined: Wed Jun 10, 2009 6:20 pm
Kayak Make: Ocean Kayak
Kayak Model: Prowler elite
VHF Call Sign: SnapperStalker
Location: Half Moon bay

Sat Aug 30, 2014 8:11 am

I searched everywhere but good ol Mitre10 had like 30 with the nuts and washers(maybe for $10. This was 3 years ago though.) I dont think they were marine grade but they show no signs of deterioration on my prowler. I kicked myself for driving all over the place looking for themwhen they were at "my Local" :headbang:
SnapperStalker

It's not the size of your rod that counts....
It's how you use it

User avatar
DARKE ANGLER
Posts: 797
Joined: Mon Dec 19, 2011 7:35 pm
Kayak Make: Hobie
Kayak Model: Hobie Outback Camo
Contact:

Sat Aug 30, 2014 6:26 pm

WaterHornet wrote:Hey guys,
Any of you have 4X m5 stainless steel 12mm screw spares?? I've been looking all over the net and hardware stores (even burnsco) for them but no luck :(
Need it for the Starport HD for my O.K. then i can start taking vids with my New GOPRO! :rofl:

Thanks in advance :)
Shame you didn't say anything before I picked up the GoPro H3..
They have to be screw heads (slot or philips etc)? I have plenty in 20mm & 30mm Hex heads.
Hobie Out Back 2017
Image

User avatar
WaterHornet
Posts: 272
Joined: Fri Nov 15, 2013 8:31 pm
Kayak Make: OK
Kayak Model: Trident 4.3
Location: North Shore

Sat Aug 30, 2014 9:39 pm

Jungl3Jim wrote:
WaterHornet wrote:Hey guys,
Any of you have 4X m5 stainless steel 12mm screw spares?? I've been looking all over the net and hardware stores (even burnsco) for them but no luck :(
Need it for the Starport HD for my O.K. then i can start taking vids with my New GOPRO! :rofl:

Thanks in advance :)
Shame you didn't say anything before I picked up the GoPro H3..
They have to be screw heads (slot or philips etc)? I have plenty in 20mm & 30mm Hex heads.
Wow! So much offers haha thanks for all of that guys! Mental sorted me out already!


Yeah just found out i needed them.. birthday coming up soon so got a BOOM and the GOPRO BLACK+ as a present! *Stoked*

Will take videos during the long summer break!! For now, stay home study study study!!
Image

User avatar
blair
Posts: 297
Joined: Fri Dec 06, 2013 8:43 pm
Kayak Make: Viking
Kayak Model: Profish 400
Location: north shore

Mon Sep 01, 2014 7:47 am

have you tried 'The bolt shop' 191 Archers Rd, Hillcrest, Glenfield 0629

They were great when I was trying to find a bolt for my bike and none of the bikes shops could help.

User avatar
WaterHornet
Posts: 272
Joined: Fri Nov 15, 2013 8:31 pm
Kayak Make: OK
Kayak Model: Trident 4.3
Location: North Shore

Mon Sep 01, 2014 11:25 am

blair wrote:have you tried 'The bolt shop' 191 Archers Rd, Hillcrest, Glenfield 0629

They were great when I was trying to find a bolt for my bike and none of the bikes shops could help.
Oo thanks for the reference. Id surely go look over there if i need bolts :) thanks
Bicycle or motorbike??? Cause i ride too! :)
Image

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests